Table of Contents
Advertisement
1.0
GENERAL INFORMATION
This general manual provides important safety informati-
on relating to the installation, maintenance and handling
of bifacial double glass solar modules (BiKu and BiHiKu
series). Professional installer must read these guidelines
carefully and strictly follow these instructions. Failure to
follow these instructions may result in death, injury or
property damage. The installation and handling of PV
modules requires professional skills and should only be
performed by qualified professionals. Installers must
inform end -users (consumers) about the aforesaid infor-
mation accordingly.
The word "module" or "PV module" used in this manual
refers to one or more double glass solar modules. This
manual is only valid for the bifacial double glass module
types CS3W-PB-AG, CS3U-MB-FG, CS3K-MB-FG, CS3U-
MB-AG, CS3K-MB-AG, CS3U-PB-FG, CS3K-PB-FG, CS3U-PB-
AG and CS3K-PB-AG. Please retain this manual for future
reference.
We recommend visiting www.canadiansolar.com regular-
ly for the most updated version of bifacial module instal-
lation manual.
This installation manual is applicable for EU and EEA
countries only.
1.1
INSTALLATION MANUAL DISCLAIMER
The information contained in this manual is subject
to change by Canadian Solar Inc. without prior notice.
Canadian Solar Inc. gives no warranty of any kind
whatsoever, either explicitly or implicitly, with respect to
the information contained herein.
In the event of any inconsistency among different
language versions of this document, the English
version shall prevail. Please refer to our product lists
and documents published on our website at: http://
www.canadiansolar.com as these lists are updated on a
regular basis.
1.2 LIMITATION OF LIABILITY
Canadian Solar Inc. shall not be held responsible for da-
mages of any kind, including– without limitation – bodily
harm, injury or damage to property, in connection with
handling PV modules, system installation, or compliance
or non-compliance with the instructions set forth in this
manual.
2.0 SAFETY PRECAUTIONS
Warning: Before attempting to install, wire,
operate and/or service the module and other
electrical equipment, all instructions
should be read and understood. PV module connectors
pass direct current (DC) when exposed to sunlight or
other light sources. Contact with electrically active parts
of the module, such as terminals, can result in injury or
death, irrespective of whether or not the module and the
other electrical equipment have been connected.
Avertissement: Toutes les instructions devront
être lues et comprises avant de procéder à
l'installation, le câblage, l'exploitation et/ou
l'entretien des panneaux. Les interconnexions des
panneaux conduisent du courant continu (CC) lorsque le
panneau est exposé à la lumière du soleil ou à d'autres
sources lumineuses. Tout contact avec des éléments
sous tension du panneau tels que ses bornes de sortie
peut entraîner des blessures ou la mort, que le panneau
soit connecté ou non.
GENERAL SAFETY
· All Modules must be installed by licensed electricians
in accordance with the applicable electrical codes
such as, the latest National Electrical Code (USA) or
Canadian Electric Code (Canada) or other national or
international electrical codes.
Protective clothing (non-slip gloves, clothes,
etc.) must be worn during installation to pre-
vent direct contact with 30 V
to protect hands from sharp edges.
Prior to installation, remove all metallic jewelry
to prevent accidental exposure to live circuits.
When installing modules in light rain, morning
dew, take appropriate measures to prevent
water ingress into the connectors, f. e. using
connector endcaps.
Do not allow children or unauthorized persons
near the installation site or module storage
area.
· Use electrically insulated tools to reduce the risk of
electric shock.
· If the disconnects and over current protective devices
(OCPD) cannot be opened or the inverter cannot be
| 3
or greater, and
DC
Advertisement
Table of Contents
