General Information; Installation Manual Disclaimer; Limitation Of Liability; Safety Precautions - Canadian Solar Dymond CS6K-245P-FG Installation Manual

4 |
1.0

GENERAL INFORMATION

This general manual provides important safety
information relating to the installation, maintenance
and handling of double glass solar modules. Profes-
sional installer must read these guidelines carefully
and strictly follow these instructions. Failure to
follow these instructions may result in death, injury
or property damage. The installation and hand-
ling of PV modules requires professional skills and
should only be performed by qualified professionals.
Installers must inform end -users (consumers) the
aforesaid information accordingly.
The word "module" or "PV module" used in this
manual refers to one or more double glass solar
modules. This manual is only valid for the double
glass module type CS6K-P-FG, CS6X-P-FG, CS6K-M-
FG, CS6K-MS-FG and CS6X-M-FG. Please retain this
manual for future reference. We recommend visiting
www.canadiansolar.com
updated version.
1.1

INSTALLATION MANUAL DISCLAIMER

The information contained in this manual is subject
to change by Canadian Solar Inc. without prior
notice. Canadian Solar Inc. gives no warranty of any
kind whatsoever, either explicitly or implicitly,
with respect to the information contained herein.
This Manual (or document) is written in English with
Chinese (or other language) translation for reference
only. In case there are inconsistencies or conflicts
between the English version and the Chinese version
(or other language version) of this Manual (or
document), the English version shall prevail and take
control in all respects.
1.2

LIMITATION OF LIABILITY

Canadian Solar Inc. shall not be held responsible for
damages of any kind, including – without limitation –
bodily harm, injury or damage to property, in
connection with handling PV modules, system
installation, or compliance or non-compliance with
the instructions set forth in this manual.
EN-Rev IM-FDM-EN/1.6 Copyright © March 2017. Canadian Solar Inc.
regularly for the most
2.0

SAFETY PRECAUTIONS

Warning:
Before attempting to install,
wire, operate and/or service the module
and other electrical equipment, all inst-
ructions should be read and understood.
PV module interconnectors pass direct current
(DC) when exposed to sunlight or other light
sources. Contact with electrically active parts
of the module, such as terminals, can result in
injury or death, irrespective of whether or not the
module and the other electrical equipment have
been connected.
Avertissement: Toutes les instructions devront
être lues et comprises avant de procéder à
l'installation, le câblage, l'exploitation et/ou
l'entretien des panneaux. Les interconnexions
des panneaux conduisent du courant continu
(CC) lorsque le panneau est exposé à la lumière
du soleil ou à d'autres sources lumineuses.
Tout contact avec des éléments sous tension
du panneau tels que ses bornes de sortie peut
entraîner des blessures ou la mort,
que le panneau soit connecté ou non.
GENERAL SAFETY
· All modules must be installed by licensed electricians
in accordance with the applicable electrical codes
such as, the latest National Electrical Code (USA) or
Canadian Electric Code (Canada), or other national
or international electrical codes.
Protective clothing (non-slip gloves,
clothes, etc.) must be worn during
installation to prevent direct contact
with 30 VDC or greater, and to protect
your hands from sharp edges.
Prior to installation, remove all metallic
jewelry to prevent accidental exposure
to live circuits.
When installing or handling modules in
light rain, morning dew or strong wind,
appropriate safety measures should be
taken to avoid damaging the modules or
injuring people.
Do not allow children and unauthorized