Table of Contents
Advertisement
INSTALLATION – SOLAR STORAGE TANK
TYPICAL INSTALLATION – REMOTE GAS BOOSTER 20L, 26L
SOLAR HOT PIPE
Insulated copper pipe. use
a compression nut and olive
SOLAR HOT PIPE
WALL BRACKET
Insulated copper pipe. use
SOLAR PREHEAT
a compression nut and olive
(HOT WATER) OUTLET
Use a union connection &
WALL BRACKET
insulate hot water pipe.
SOLAR PREHEAT
(HOT WATER) OUTLET
GAS BOOSTER
Use a union connection &
WATER HEATER
insulate hot water pipe.
FLUE OUTLET
Clearances must comply with
GAS BOOSTER
AS 5601 or AS/NZS 5601.1 as
WATER HEATER
applicable under local regulations.
FLUE OUTLET
Clearances must comply with
HOT WATER OUTLET
AS 5601 or AS/NZS 5601.1 as
Use a union connection
applicable under local regulations.
and insulate hot
water pipe
HOT WATER OUTLET
Use a union connection
POWER SUPPLY CORD
and insulate hot
All electrical work must
water pipe
be carried out by a
licensed electrical worker.
POWER SUPPLY CORD
Power outlet must be
All electrical work must
earthed & weatherproof.
be carried out by a
licensed electrical worker.
SOLAR PREHEAT INLET
Power outlet must be
Use a union connection &
earthed & weatherproof.
insulate pipe.
SOLAR PREHEAT INLET
GAS SUPPLY PIPE
Use a union connection &
Isolating valve &
insulate pipe.
union must be used.
GAS SUPPLY PIPE
Isolating valve &
union must be used.
Solar Premier Loline 160 Water Heater (Outdoor Tank Location) with Remote In-Series 20L, 26L Gas
COLD WATER CONNECTION
Cold water connection must
comply with local regulations.
COLD WATER CONNECTION
Cold water connection must
comply with local regulations.
Solar Premier Loline 160 Water Heater (Indoor Tank Location) with Remote In-Series 20L, 26L Gas Booster
SOLAR DRAIN BACK 160 WITH REMOTE GAS BOOST
SOLAR DRAIN BACK 160 WITH REMOTE GAS BOOST
COLD WATER CONNECTION
Cold water connection must
comply with local regulations
COLD WATER CONNECTION
OUTDOOR INSTALLATION
Cold water connection must
comply with local regulations
Booster
OUTDOOR INSTALLATION
INDOOR INSTALLATION
TYPICAL INSTALLATION
INDOOR INSTALLATION
TYPICAL INSTALLATION
32
SENSOR
CONNECTION
HOT SENSOR LEAD
SENSOR
CONNECTION
HOT SENSOR LEAD
CABLE TIE LEAD
TO PIPE INSULATION
CABLE TIE LEAD
TO PIPE INSULATION
SOLAR COLD PIPE
Insulated copper pipe.
Use a compression
nut and olive.
SOLAR COLD PIPE
Insulated copper pipe.
SOLAR CIRCUIT
Use a compression
PRESSURE RELIEF VALVE
nut and olive.
AND DRAINLINE
SOLAR CIRCUIT
PRESSURE RELIEF VALVE
TEMPERATURE
AND DRAINLINE
PRESSURE RELIEF
VALVE
TEMPERATURE
TPR VALVE DRAIN LINE
PRESSURE RELIEF
Drain line must
VALVE
terminate away from the
base of the water heater.
TPR VALVE DRAIN LINE
Discharge point must
Drain line must
comply with
terminate away from the
AS/NZS 3500.4
base of the water heater.
Discharge point must
SOLAR MONITOR
comply with
AS/NZS 3500.4
FRONT COVER
SOLAR MONITOR
BASE
Level, stable, impervious
base, designed to avoid
FRONT COVER
ponding.
BASE
Level, stable, impervious
CABLE TIE
base, designed to avoid
MOUNT
ponding.
CABLE TIE
MOUNT
SAFE TRAY WITH DRAIN
As specified in AS/NZS
3500.4
Note: water heater
SAFE TRAY WITH DRAIN
warranty does not cover
As specified in AS/NZS
property damage.
3500.4
Note: water heater
warranty does not cover
property damage.
Advertisement
Table of Contents
