Table of Contents
Advertisement
TYPICAL INSTALLATION – TANK MOUNTED GAS BOOSTER 20L, 26L
SOLAR HOT PIPE
Insulated copper pipe.
Use a compression
nut and olive.
SOLAR CIRCUIT
PRESSURE RELIEF VALVE
AND DRAIN LINE
WALL BRACKET
SOLAR PREHEAT
(HOT WATER) OUTLET
Use a union connection
& insulate hot water pipe.
HOT WATER OUTLET
Use a union connection
& insulate hot water pipe.
INSULATED HOT
WATER PIPE
GAS SUPPLY PIPE
Isolating valve &
union must be used.
COLD WATER
CONNECTION
Cold water connection
must comply with local
regulations.
POWER SUPPLY CORD
All electrical work must be carried
out by a licenced tradesperson.
Power outlet must be earthed &
weatherproof.
Solar Premier Loline 160 Water Heater (Outdoor Tank Location)
SOLAR DRAIN BACK 160 with
SENSOR
CONNECTION
CABLE TIE
MOUNT
with Tank Mounted In-Series 20L, 26L Gas Booster
OUTDOOR INSTALLATION
INSTALLATION – SOLAR STORAGE TANK
HOT SENSOR LEAD
SOLAR COLD PIPE
Insulated copper
pipe.Use a
compression
nut and olive.
BASE
Level, stable, impervious
FRONT
base, designed, to avoid ponding.
COVER
31
CABLE TIE
TO PIPE INSULATION
TEMPERATURE
PRESSURE
RELIEF VALVE
(on right hand side
of tank)
GAS BOOSTER
WATER HEATER
FLUE OUTLET
Clearances must
comply with AS 5601 or
AS/NZS 5601.1 as applicable
under local regulations.
SOLAR PREHEAT
INLET
Use a union connection
& insulate pipe.
POWER SUPPLY CORD
All electrical work must
be carried out by a
licensed electrical worker.
Power outlet must be
earthed & weatherproof.
TPR VALVE DRAIN LINE
Drainline must terminate
away from the base of the
water heater. Discharge
point must comply with
AS/NZS 3500.4
SOLAR MONITOR
Advertisement
Table of Contents
