Download Print this page

Fermax CITYCOM III CENTRAL GUARD UNIT Manual page 20

Advertisement

Available languages

Available languages

communication from the panel with the desired house. This mode is only possible in
automatic mode configuration (jumper CN8 short circuited between pins 1 and 2).
NIGHT mode: Key position disconnected. The Central is totally deactivated,
unable to receive calls from the apartments and the calls from outdoor panels go
straight through to the house phones.
The Guard Unit Central may have two versions of house call pushbuttons:
Call buttons: Let you call from the Central to the selected house. When a call is
made from house to guard unit, a call tone is generated in the guard unit central.
Call buttons
selected. When a call is made from house to guard unit, a call tone is generated in the
Guard Unit Central and the LED of the pushbutton of the house making the call lights
up. The LED remains lit. The concierge can switch off all the LED signals by pressing
the Guard Unit Central reset button (black button).
2. OPERATION
GUARD UNIT - HOUSE
The GUARD UNIT-HOUSE status (green LED lit) is the state in which the Central
will initialise every time the key is used to connect. In addition, the Central returns to this
state automatically when, upon entering any other state, it detects that the conversation
is over or there is no activity. In this state, the conversations are established between
the Central and one of the apartments or else between any two houses. The status
LED blinks during the conversation until hanging up is detected.
HOUSE - HOUSE
If one apartment wishes to talk to another, they call up the Guard Unit Central
and give the concierge the number of the house they want to call. The concierge makes
the call to the other dwelling and waits for them to answer. Once communication is
established between both houses, the concierge hangs up and the green LED blinks for
the duration of the conversation.
The concierge may intervene in the conversation between two houses at any
time.
HOUSE - PANEL
In this state, the Central allows direct communication between the house and the
outdoor panel. The yellow LED keeps blinking during the conversation and when the
house phone is hung up, the Central detects it and automatically goes into GUARD
UNIT-HOUSE mode (green LED lit).
with retention:
FERMAX ELECTRÓNICA S. A. E.
Let you call from the Central to the house
2
CITYCOM III Guard Unit Central
Code 94487 V-02/04

Advertisement

loading
Need help?

Need help?

Do you have a question about the CITYCOM III CENTRAL GUARD UNIT and is the answer not in the manual?

Questions and answers