Feature Codes; Installation; Service - StorageTek L180 Reference Manual

General Information

Feature Codes

The UPS is an optional feature available from StorageTek.
library, feature code, and conversion bill number for the UPS:
Table 1-1. Feature Codes
Library
L180
L700
Note: The UPS feature requires the optional rack cooling feature. See

Installation

StorageTek service representatives can install the UPS feature in the libraries.
The UPS bundle is drop-shipped by APC (the manufacturer) within 24 hours of
the receipt of the order.
Use the information in the L180/L700 Tape Library Ordering and Configuration
Guide (part number MT9112) to order the library and the desired features
including the UPS.
See Chapter 3

Service

If there is a problem, place a service call to StorageTek's Call Center. If it is
determined that the UPS has failed; the call will be escalated by the Call Center
and StorageTek's Technical Support to APC, who has 7 by 24 coverage. The
replacement parts will be sent to the customer site.
Notes:
• See
• See
1-2
Feature Description
Code
RPWR Domestic power switch and UPS
EPWR International power switch and UPS
RPWR Domestic power switch and UPS
EPWR International power switch and UPS
Chapter 3 for information about the prerequisites.
for an overview of the installation instructions.
Chapter 4 for information about how to isolate problems with the UPS.
Chapter 5 for the procedure to place a service call.
First Edition
Table 1-1 lists the
Conversion
Bill
101406
101407
101410
101411
96047