Table of Contents
Advertisement
3. Determine location to mount the sensor.
4. Choose applicable mounting bracket. The sensor hardware packet contains two mounting brackets for different
mounting scenarios. Use the provided large screws and anchors to attach the bracket to the wall. (Leave at least
3 inches of clearance above the sensor to allow for battery replacement without uninstalling the mounting
bracket.)
5. Place sensor with arm on mounting bracket. Adjust the horizontal positioning of the sensor to point towards the
desired coverage area.
6. Secure the mounting arm location by sliding lock pin into the hole. Use the washer and remaining small screw to
secure the lock pin by screwing upwards through the bottom of the hole in the mounting bracket.
https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Image_Sensor/Image_Sensor_Version_3/Alarm.com_Image_S
Updated: Wed, 19 Jun 2019 01:34:38 GMT
9
Advertisement
Table of Contents
