Table of Contents
Advertisement
Batteries
Operating temperature range
Weight
Dimensions
Supervisory interval
Wireless signal range
Color
Recommended mounting height and angle
Motion profiles and sensor range
Hardware compatibility requirements - by panel
Panel
GC3e
Other feature compatibility
Two-Way Voice compatibility
Images cannot be transmitted while a Two-Way Voice call is in session. When the Image Sensor is installed on a
system with Two-Way Voice over the cellular network, image transmission during an alarm may be interrupted by the
two-way session. The image transmission resumes once the call has terminated.
Pet immunity settings
Two parts to making the Image Sensor pet immune:
1. Set PIR sensitivity settings to low.
2. Mount set at a height of 6 feet, and install the sensor with the 6 degree mounting angle.
Batteries
Battery type
The Image Sensor uses 2 AA 1.5v Energizer Ultimate Lithium batteries (UL compliant).
https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Image_Sensor/Image_Sensor_Version_3/Alarm.com_Image_S
For details, see
60° to 80°F
3.1 oz. (with batteries and without mounting accessories)
3.1'' h x 1.8'' w x 2.3'' d
100 minutes (sensor), 3 hours (alarm hardwire)
Greater than 400 feet open air
White
See
See the PIR sensitivity settings table in
Sensor
Panel version
All versions
Batteries
Mounting Image Sensor
Extra hardware
XCVR3 900 MHz dongle transceiver
Updated: Wed, 19 Jun 2019 01:34:38 GMT
Mounting Image
2
Advertisement
Table of Contents
