Table of Contents
Advertisement
RoomNum: Apartment number to which access card must be linked.
Adding cards through graphical interface:
Enter the desired apartment number and wave the card in front of the area of the
reader. A signal will sound from the panel, confirming that the card is registered, and a
card number will be displayed in the Card field.
Reboot: Restart outdoor panel. To restart outdoor panel, it is necessary to enter "#", press "1",
and then press "#" again.
Default: Reset panel settings to factory settings. To reset outdoor panel, it is necessary to
enter "#", press "1", and then press "#" again.
Note that all cards will be removed from the panel memory when it is factory reset.
About system
After switching to About system menu, the following interface will be displayed:
Configuration through graphical interface – 15
Advertisement
Table of Contents
