BAS-IP AA-07FB Quick Start Manual
  1. Manuals
  2. Brands
  3. BAS-IP Manuals
  4. Intercom System
  5. AA-07FB
  6. Quick start manual

BAS-IP AA-07FB Quick Start Manual

Entrance panel
Hide thumbs Also See for AA-07FB:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
quickstart guide
AA-07FB
entrance PANEL
AA-07FB SILVER multi apartment panel is an excellent solution for office
buildings, apartment complexes and cottage communities.
A distinctive feature of this panel is a color TFT screen with backlight,
as well as a high-resolution IP camera with wide viewing angles.
1
2
3
4
5
6
7
8
9
*
0
#
T
1
Backlight
2
Loudspeaker
3
Camera
4
4.3'' Display
5
Proximity sensors
6
Keypad
7
Reader
Full User Manual
wiki.bas-ip.com

Advertisement

Table of Contents
loading

Related Manuals for BAS-IP AA-07FB

Summary of Contents for BAS-IP AA-07FB

  • Page 1 AA-07FB entrance PANEL Full User Manual AA-07FB SILVER multi apartment panel is an excellent solution for office buildings, apartment complexes and cottage communities. A distinctive feature of this panel is a color TFT screen with backlight, as well as a high-resolution IP camera with wide viewing angles.
  • Page 2 ENTRANCE PANEL MAIN SCREEN main screen On the main screen, you can find information about: • Data that must be entered to call the apartment (to call the required apartment, you need to enter from 4 to 10 digits, depending on the current panel mode); •...
  • Page 3 ENTRANCE PANEL SETTINGS HOW TO OPEN SETTINGS MENU? You can open basic settings from a panel or a web interface. To enter the system settings, you must: • Press the # button twice (the inscription Admin will appear on the screen). •...

  • Page 4: Device Settings

    Device Settings In this menu, you can configure: • Panel operation mode • Wall mode is used when the panel is installed on the perimeter of the object. If this variant is chosen, on the panel you must enter Building No., Unit No., Floor No., and Apartment No. to call the necessary monitor.

  • Page 5: Network Settings

    Network settings Here you can turn on/off DHCP connection and get network settings automatically or enter it manually. For correct panel work you must enter: • Panel IP address. By default, a device can have a static IP address 192.168.1.90 or 192.168.1.91 •...

  • Page 6: Access Settings

    Access settings In this menu, you can set: • Lock open timeout is a period (1-300 sec) during which relay contacts will be closed or open (depending on the lock type), and a lock will stay open • Lock open delay is a period (1-300 sec) after which relay contacts will close or open after sending a signal to open a lock •...

  • Page 7: Face Settings

    Face settings • Enable / disable the feature • Select similarity level (the lower the similarity level, the greater the error can be in scanning a face and granting access): • Low: the minimal similarity is necessary for access (changes in appearance (glasses, beard, presence of a hat) will not be taken into account) •...

  • Page 8: Misc Settings

    Misc settings In this menu, you can: • Add a user access card to the panel memory You can add a card both in this menu and in the web interface (see the «Access management» or «Identifiers» section). To add a card via the panel interface: •...

Table of Contents