Connecting Your Cutter Via Usb Cable - PrismCut P20 User Manual

2.7 Connecting your PrismCut cutter via USB cable (optional)
There is no need to connect your PrismCut via USB cable if you are already
connecting via WiFi. USB is provided as a backup in case you are in an area
that is not served by WiFi. WiFi is the recommended connection method.
To connect via USB, connect one cable end to USB cable port on the cutter
and connect the other cable end to an available USB port on your computer.
Sure Cuts A Lot (MAC) users can enable USB communications by clicking on the
Cutter icon to open the Cut Settings window and selecting USB and Auto Detect
as the Connection method and Port type.
VinylMaster (Windows) users can enable USB communications by clicking on the
Shuttle icon and then select the Connection Tab within the VinylSpooler window.
Under Connection method select Direct USB Port from pull down menu
15
www.prismcut.com www.prismcut.com