Honeywell Thor VM1 Quick Start Manual page 5

Vehicle-mount computer

Hide thumbs Also See for Thor VM1:

Twist the red and red/white wires together and twist the black and

black/white wires together before connecting to vehicle power.

Connect the green wire to vehicle ground:

For battery powered vehicles:

The green wire must be connected to the vehicle chassis

ground.

For internal combustion engine powered vehicles:

The green wire is connected to the vehicle chassis ground,

which can also be battery negative.

Wire Color

Red

Red/White

Black

Black/White

Green

Blue

Power Cable Installation

1. The Thor VM1 must not be mounted in the Quick Mount

Smart Dock. The power switch on the dock must be turned

Off. The power cable must be UNPLUGGED from the

dock.

2. While observing the Fuse Requirements in panel 2, con-

nect the power cable as close as possible to the actual bat-

tery terminals of the vehicle (if using unswitched power).

Connection

DC + (10-60 VDC)

DC -

Ground

Ignition Input (optional)

Refer to the Thor VM1 User's Guide,

available at www.honeywellaidc.com, for

further information about ignition control.

Table of Contents