Wiring Diagram For 24V Mode - Trane ACONT900AC43UA Service Manual

Electronic Air Cleaners
Figure 2

Wiring Diagram for 24V Mode

• Connect the power/control wiring per Figure 3.
Note: Communicating furnaces require KIT # BAYACCECOMM101.
Note: Wiring diagrams for the Communicating Air Handler, Communicating Furnaces and Oil Furnace can be
found on pages A6-A7 of this chapter.
Air Handler may not have a Low Voltage Terminal board. Connect Electronic Air Cleaner wires to the Air
Handler Low Voltage Color coded wires. Install Transformer, one is supplied with the Electronic Air Cleaner,
in the Furnace or Air Handler.
Note: The Black wire must be connected to chassis ground to ensure proper operation.
Figure 3
AC - A 5