Mounting And Dimensions; C441Q And C441S; Figure 1. Installation Diagram - Eaton C441 Series User Manual

Mounting and Dimensions

C441Q and C441S

Mounting
The C441 PROFIBUS adapters are designed to be installed
on the right side of the Motor Insight base unit or the S611.

Figure 1. Installation Diagram

1. Align module with side of Motor Insight base unit or
the S611.
2. Slide module bottom pegs into appropriate slots.
3. Rotate module up and gently click the base unit and
module together.
4. Connect 24 Vdc power, PROFIBUS cable, and IO
connector if desired.
Note: For S611 Soft Starter applications, it is recommended
to mount a C441QS or C441SS module beside the
S611 and wire the D0/D1 terminals between the two
devices. More information on this is provided later in
this document.
C441 PROFIBUS Module User Manual MN042002EN—July 2015 www.eaton.com
Mounting and Dimensions
5