General Safety Rules For Operation - Datum DT1H1V2PR Operating Instructions Manual

GENERAL SAFETY RULES FOR OPERATION

!
WARNING
Save all warnings and instructions for future reference.
•
Do not stare into beam regardless of distance.
•
Do not use the laser intensive glasses as safety goggles, sunglasses or when driving.
•
Do not point laser in the direction of other people or animals.
•
Do not point laser in the direction of mirrors or other reflective surfaces.
•
Store in a secure location when not in use.
•
This is a quality laser measuring device and is 100% factory adjusted within the stated
tolerance.
•
Laser should not be used as a toy or by children.
•
Do not view beam through optical instruments such as theodolites, binoculars, cameras or
magnifying lenses.
•
Avoid using laser in darkened areas. Ensure sufficient light levels to avoid damage to eyes.
•
Set up cross line laser to ensure laser beam path is above or below eye level.
•
Ensure cross line laser is securely set up to avoid accidental movement.
•
Always ensure the laser beam is aimed at a sturdy work piece without reflective surface.
Bright shiny reflective sheet steel or the like is not suitable for laser use as the reflective
surface could direct the beam back at the operator.
•
Do not break up or throw the battery into fire, please recycle the battery after use.
•
Turn the laser off when it is not in use. Leaving the laser on increases the risk of staring into
the laser beam.
•
Do not use or store the instrument in locations where the temperature may reach or
exceed 40°C.
•
Do not disassemble the instrument or attempt to perform any internal servicing as this will
void your warranty. Not user serviceable parts included. Only approved and authorised
service technicians can carry out warranty repairs.
•
Avoid direct eye exposure. Consult your laser safety officer or IEC 60825.14:2011 Part 14 for
best operating practice.
!
CAUTION
4
Read all safety warnings, instructions, illustrations and specifications
provided with this laser level. Failure to follow all instructions listed below
may result in personal injury.
Class 2 laser product according to IEC 60825-1:2014.
Do not stare into the laser beam or direct it towards other people.
CROSSLINE LASER LEVEL