Datum DT3X360R Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Datum Manuals
  4. Laser Level
  5. DT3X360R
  6. Operating instructions manual

Datum DT3X360R Operating Instructions Manual

3 x 360 laser level
Hide thumbs
Table of Contents

Advertisement

Quick Links

3 X 360° LASER LEVEL
MODEL NO.: DT3X360R DT3X360G
TO PREVENT SERIOUS INJURY, READ
AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
OPERATING
INSTRUCTIONS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DT3X360R and is the answer not in the manual?

Questions and answers

Related Manuals for Datum DT3X360R

Summary of Contents for Datum DT3X360R

  • Page 1 3 X 360° LASER LEVEL MODEL NO.: DT3X360R DT3X360G OPERATING TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND ALL WARNINGS INSTRUCTIONS AND INSTRUCTIONS BEFORE USE.

  • Page 2: Table Of Contents

    TABLE OF CONTENT SPECIFICATIONS ......................3 HAZARD SIGNAL WORD DEFINITIONS ..............3 GENERAL SAFETY RULES FOR OPERATION ............4 COMPONENT IDENTIFICATION ................5 OPERATION INSTRUCTION ..................6 OPTIONAL ACCESSORIES ..................7 CALIBRATION CHECK ....................8 MAINTENANCE AND SERVICE .................9 TROUBLESHOOTING ....................10 PRODUCT LABELS .....................10 WARRANTY INFORMATION ..................12 CROSSLINE LASER LEVEL...

  • Page 3: Specifications

    Optional (Part No. DT01REC sold seperately) DATUM is constantly improving its products. All information in this manual is based on the latest product information available at the time of printing. The specifications outlined herein are subject to change without prior notice or obligation. The purchaser and/or user shall assume liability for any modification and/or alterations of this equipment from original design and manufacture.

  • Page 4: General Safety Rules For Operation

    GENERAL SAFETY RULES FOR OPERATION Read all safety warnings, instructions, illustrations and specifications WARNING provided with this laser level. Failure to follow all instructions listed below may result in personal injury. Save all warnings and instructions for future reference. • Do not stare into beam regardless of distance.

  • Page 5: Component Identification

    COMPONENT IDENTIFICATION Power switch / pendulum lock 10. Height adjustment knob Control panel 11. Clamp Vertical laser output window (v1) 12. 1/4” Thread thumb screw Horizontal laser output window (h) 13. 1/4” And 5/8” tripod threads Vertical laser output window (v2) 14.

  • Page 6: Operation Instruction

    • Charge the battery with the supplied charger (indoor only) then place it into the battery compartment. Only use charger supplied by DATUM to charge the batteries. Using a battery WARNING charger not recommended by DATUM can destroy the batteries.

  • Page 7: Optional Accessories

    Pulse Mode LED Indicator light will be on when this is activated. Press the button again to exit pulse mode. OPTIONAL ACCESSORIES DATUM offers a range of accessories that are compatible with our laser levels. They can be purchased seperately and add more flexibility to get your job done. HYBRID LINE LASER DETECTOR (DT01REC)

  • Page 8: Calibration Check

    CALIBRATION CHECK It’s possible for you to check the calibration of the laser. Calibration by yourself is only approximate and the accuracy of the calibration will depend on the care with which you proceed. TO CHECK THE LEVEL Checking the horizontal pitch calibration of the laser requires 2 walls, which must be at least 5 metres apart.

  • Page 9: Maintenance And Service

    CHECKING THE HORIZONTAL LINE Position the device about 5 m from a wall and switch on the cross laser. Mark point B on the wall. Turn the laser cross approx. 2.5 m to the right and mark point C. Check whether the horizontal line from point C is level with point B to within ± 2 mm. MAINTENANCE AND SERVICE •...

  • Page 10: Troubleshooting

    Country of Origin: DT3X360R 9328225049293 Contact: Email: MW93T-DT-RED Steven steven@fukudalaser.com Filename: Date: 02/07/2019 135042 DAT 3 x 360 Multi-Line Laser Level Red DT3X360R Colours: Dieline Pantone 166 C CROSSLINE LASER LEVEL Country of Origin Warranty Spellcheck Die/Overprints Check shadows Delete extra art...
  • Page 11 OPERATING MANUAL...

  • Page 12: Warranty Information

    Any cost incurred by you in bringing the product to the place of purchase will be borne by you. Calibration and repair service Datum recommends to check instrument calibration at least once a year or on as needed basis. For calibration or repair service (not covered under warranty), please visit your place of purchase.

This manual is also suitable for:

Dt3x360g

Table of Contents