Notifier INA Manual page 64

6=EXTEQ - External Equipment
Terminal Supervision:
Printer Monitoring:
Pager:
Modem:
PRESS 1=PSYS,3=PPRG,4=FPRG,5=REMV,6=PSWD,7=MSG
PRESS 1=NFN,2=KEY,3=CABLE,4=ANN,5=UDACT,6=EXTEQ,7=LOCP
DO@YOU@WANT@TO@CHANGE@THE@TERMINAL@SUPERVISION?@(Y=YES,N=NO)@@@@@@@@@@@ : Y
DO@YOU@WANT@THE@TERMINAL@SUPERVISION@ENABLED?@(Y=YES,N=NO)@@@@@@@@@@@@
DO@YOU@WANT@TO@CHANGE@THE@PRINTER@MONITORING?@(Y=YES,N=NO)@@@@@@@@@@@@
DO@YOU@WANT@THE@PRINTER@MONITORING@ENABLED?@(Y=YES,N=NO)@@@@@@@@@@@@@@@@:
DO@YOU@WANT@TO@CHANGE@THE@PAGER@PROGRAMMING?@(Y=YES,N=NO)@@@@@@@@@@@@@@ :@Y
DO@YOU@WANT@THE@PAGER@ENABLED?@(Y=YES,N=NO)@@@@@@@@@@@@@@@@@@@@@@@@@@@
DO YOU WANT
DO YOU WANT
7=LOCP - Local Parameters
reprogrammed for the same operational mode. If an NCS, AFP-300/400 or AFP-200 fire alarm panel is present on the
NOTI•FIRE•NET network, Receiving Unit Mode can not be selected. The NCS, AFP-300/400 and AFP-200 do
not support receiving unit mode at this time.
PRESS 1=PSYS,3=PPRG,4=FPRG,5=REMV,6=PSWD,7=MSG
PRESS 1=NFN,2=KEY,3=CABLE,4=ANN,5=UDACT,6=EXTEQ,7=LOCP
DO@YOU@WANT@TO MODIFY NFPA LISTING? (Y=YES,N=NO)
SELECT NFPA LISTING
DO YOU WANT TO PROGRAM OR REMOVE THIS LISTING? (Y=PRG,N=RMV)
64
www.PDF-Zoo.com
TO CHANGE THE MODEM
THE MODEM ENABLED?
Note: If the mode of operation is changed, all nodes in the INA's group must be
(1=RCV)
D }X1X6X
PROGRAMMING? (Y=YES,N=NO)
(Y=YES,N=NO)
D }X1X7X
: 1
: 6
: Y
: Y
Y
:@Y
: Y
: Y
: 1
: 7
@@@@@@ @@@ : Y
: 1
: N
INA 15092:I 05/30/01