Power-Up, Configuration Stick And Modifications During Runtime - ABB EDS500 Series Function Manual

Functions
< c o p y r u n n i n g - c o n f i g s t a r t u p - c o n f i g >
< c o p y r u n n i n g - c o n f i g s t i c k - c o n f i g >
< c l e a r s t a r t u p - c o n f i g >
< c l e a r s t i c k - c o n f i g >
< s e t c o n f i g - s t i c k r e a d - o n l y >
< s e t c o n f i g - s t i c k n o r e a d - o n l y >
If a configuration is copied to the internal startup-config then it is also copied to the
configuration stick if that is plugged in and not write-protected.
An empty configuration is not identical with the default configuration. The default
configuration represents the state at the time of shipping and eases the access to the
device (Chapter 2.4.5, "Default Configuration and Reset of a Device").
2.4.3 Power-up, Configuration Stick and Modifications during
Runtime
At start-up there is no running-config yet. The device internal start up configuration is loaded
and the included commands are executed. The result is the initial running-config that is
identical to the startup-config. If during operation further configuration commands are
executed then the running-config is modified. If the configuration stick is plugged in during
operation then the stored configuration can be accessed. There is no automatic transfer of
the configuration.
The data of the configuration stick is used not before a restart of the device and then the
data is copied to the startup-configuration.
"Tab. 5: Modification of configuration with and without plugged-in configuration stick" shows
which configuration is modified by which action.
Action
1. Delivery State
2. Power on (no configuration stick) A1
3. Command input <set ...>
4. Command input <copy run-
ning-config startup-config>
5. Command input <set ...>
6. Plug in configuration stick
7. Command input <copy run-
ning-config stick-config>
8. Command input <set ...>
9. Device restart (with configuration
stick)
Table 5: Modification of configuration with and without plugged-in configuration stick
1KGT151021 V000 1
A D V I C E
A D V I C E
Current device Internal startup
configuration configuration
(running-config) (startup-config)
- A1
A1
A2 A1
A2 A2
A3 A2
A3 A2
A3 A2
A4 A2
A3 A3
Loading and Saving a Configuration
Configuration
stick (stick-con-
fig)
-
-
-
-
-
B1
A3
A3
A3
19