8.3.
LCD Does Not Operate
Confirm the voltage at Pin7 of CN460.
Is it about 3.3V?
YES
Confirm the voltage between Pin 12 and Pin 13 of
CN460.
Is it about following voltage?
[DT546]:13.8V / [DT543]:10.0V
Note)
"LCD contrast" must be default setting (Level 3).
YES
Confirm the waveform SCLK at TP:SPI_CLK.
Refer to the waveform (13).
YES
Confirm the waveform at Pin 3, 4, 5 and 6 of CN460.
Refer to the waveform (14),(15).
YES
Confirm the LCD display.
Is it working?
YES
END
Check the soldering.
Resolder or replace parts as needed.
NO
Related parts: CN460,D460,C460-462,C464
NO
Related parts:C465,C466,C467
NO
Related parts: L460,R435
NO
Related parts:CN460,R430-432,R434,R436,R437
NO
Related parts:LCD module,CN460
27
KX-DT543/KX-DT543-B/KX-DT546/KX-DT546-B