To Remove Water Pump - Panasonic WH-MHF09G3E5 Service Manual

During reinstall Air Purge Valve.

17.8 To Remove Water Pump

2 Remove the screw from the
particular plate.
When reinstall the water pipe, use grease or water at the joining.
Make sure plug is fully close
in clockwise direction.
Apply some water based grease
on packing surface before fix
with shut off valve.
4 Remove 2 retaining rings, then pull
out the Water Pump.
126
Packing
Water Pump
1 Disconnect CN-PUMP2 connector.
3 Loosen the nut.