Error Fault Indications - Honeywell UDC1200 MICRO-PRO Startup Manual

10. ERROR/FAULT INDICATIONS
Parameter
Instrument
parameters are
in default
conditions
Over Range
Under Range
Sensor Break
Option 1 Error
Option 2 Error
Option 3 Error
Option A Error
UDC 1200 Start-Up Guide
Upper Lower
Display Display
 
Mode, next press

Normal

Normal

Normal





Configuration & Setup required. Seen at
first turn on or if hardware configuration
Press to enter the Configuration
or
unlock code number, then press
Input > 5% over-range
Input > 5% under-range
Break in input sensor or wiring
Option 1 module fault
Option 2 module fault
Option 3 module fault
Auxiliary Option module fault
Description
changed.
to enter the
to
proceed.
Rev 1