Sony PWS-100RX1 Help Manual page 27

Help Guide
NETWORK RX STATION
PWS-100RX1 / PWS-110RX1 / PWS-110RX1A
Setting the Camcorder to Network Client Mode
When shooting using a network-enabled camcorder, use the following procedure to set the camcorder to network client
mode.
Attach an LTE modem to the camcorder.
1
Turn on the camcorder.
2
Open the settings menu on the camcorder.
3
Configure network client mode.
4
Turn on network client mode.
5
Note
For details about attaching and configuration, refer to the manual for the camcorder.
Synchronize the date and time on the camcorder with the PWS-100RX1.
Ver.1.11 or later
4-746-464-14(1) Copyright 2015 Sony Corporation
27