Sony PWS-100RX1 Help Manual page 33

Network rx station
Table of Contents

Advertisement

Help Guide
NETWORK RX STATION
PWS-100RX1 / PWS-110RX1 / PWS-110RX1A
Transferring Camcorder Clips to an FTP Server
You can transfer camcorder clips to an FTP server under control from the Connection Control Manager. Perform the
following procedure on the File Transfer screen.
Click [File Transfer] in the global header to display the File Transfer screen.
1
Select a camcorder in the Source area of the File Transfer screen.
2
Click the [Proxy Clips] tab or the [High-res. Clips] tab.
3
A list of clips stored on the selected camcorder is displayed.
Click the clips to transfer to place a check mark in the checkboxes.
4
Click [Transfer].
5
The selected clips are added to the transfer job list, and the clips are then transferred in sequence.
You can check the transfer state by clicking the [Job List] tab to display the list of transfer jobs.
Note
To transfer camcorder clips to an FTP server, configure settings for FTP connections on the Settings screen of the Connection
Control Manager.
File transfers may stop momentarily if the camcorder is currently streaming. The file transfer will resume when streaming stops.
Related Topic
Structure of the File Transfer Screen
Configuring Connection Control Manager Receiver and Output Settings
Ver.1.11 or later
4-746-464-14(1) Copyright 2015 Sony Corporation
33

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pws-110rx1aPws-110rx1

Table of Contents