GOLDEN MASK DEEP HUNTER Pro3 Instruction Manual page 5

GM Electronics Ltd.
The "coil-cable" is composed of series-connected conductors in multi-conductor special
cable, which form a coil with certain parameters. It is mounted onto a frame of PVC
pipes, joints and elbows, and fixed using the enclosed cable connections of type
"Velcro". The connecting cable is plugged into the connector labeled "Coil", which is
mounted on the right edge of the front panel of the electronic block. The connector
ring must be tightened after placing connector.
The search with a "frame" needs an assistant who helps the horizontal movement of
the frame, using one of the enclosed belts. With another belt the operator brings the
detector and determines the height and direction of movement.
There are other ways for individual work with search coil type "frame" in which the
operator stands inside it and thus moves, holding both belts.
Categorically prohibits the use of this method, and "entry" of the operator or another
assistant inside the "frame" of a metal detector Golden Mask Deep Hunter detector
while in working stage! Adverse effects of the electromagnetic field can lead to
serious health problems and/or injuries!
If you have not the possibility to use an assistant, a "dragging" of the search coil is
recommended. For this purpose can be used a device of type "sledge", made of non-
metallic materials. The sledge must provide a constant height (about 10 cm) of the
frame from the ground surface.
The search should always begin with a brief pressing of the "RETUNE" button, the same
is recommended to be carried out periodically during the search, in order to maintain
maximum stability and sensitivity.
The movement of the antenna must be carried out in parallel strips (bands) that overlap
by up to 30% in order not to miss a portion of the field. The speed of the movement
should be up to 1m/s.
Golden Mask Deep Hunter Pro3 – Instruction Manual
5