Cleaning The Filters - Shark Powered Lift-Away DuoClean NV801UK Series Instruction Manual

STEP 3
3 Press top dust-cup empty
latch to access dust
screen and remove built-
up debris as required.
FOAM FILTER
FILTER FRAME
FELT FILTER

CLEANING THE FILTERS

1 Pre-Motor
(foam and felt):
With the dust cup
removed, take out the
foam and felt filters, and
rinse with water. Tap loose
dirt off filters between
washes as needed.
2 Post-Motor (HEPA):
To access the HEPA filter,
reach under the grill,
press the button, and pull
the grill away from the
vacuum.
PRE-MOTOR
POST-MOTOR
HEPA PRE-
HEPA
NOTE: To remove the pre-HEPA
foam filter, pull out from frame.
To remove the pre-
HEPA filter, simply pull
black foam out from
frame. Rinse both HEPA
filter and pre-HEPA
filter and allow to air
dry completely before
replacing. Hand wash
only. Replace it back and
make sure edges are
tucked into HEPA frame
when HEPA inserted
back into vacuum.
s h a r kc l e a n . e u
18