Planet Networking & Communication IHD-210PR User Manual page 36

High Definition HDMI Extender over IP with PoE
IHD-210PT / IHD-210PR
2. You can set VLAN to convert the video source, please refer to the topology below and imagine that
the concept is based on your issue.
You can set up port-based VLAN for the transmitter (IHD-210PT), and then for the receiver (IHD-
210PR). You can just dynamically swap the receiver port to a different VLAN for video source change.
You can swap VLAN via Web interface of the switch.
However, to be faster and easier to swap the sources, you can consider using Telnet or RS232
console via CLI (command line).
Since the commands are just fixed commands, you can record those commands into a macro, and
36