Planet Networking & Communication IHD-210PR User Manual page 30

High definition hdmi extender over ip with poe
Table of Contents

Advertisement

Description
Device IP
Show the selected device's IP address.
Tx Version
Show the firmware version.
Encoder
Show the Encoder version.
Version
LAN Status
If the device connects to LAN successfully, it will show "Link Up".
Lock: The video is transmitting.
Video Lock
Unlock: There is no transmitting video.
If the transmitting video supports HDCP, it will show "on".
HDCP
If the transmitting video does not support HDCP, it will show "off".
Setting the resolution downscale of each group on the selected Tx --
Down Scale
After changing the setting, please click the update button to make the change
Setup
effective.
Setting the selected Tx group ID –
The maximum is up to 64 groups from 0 to 63. After changing the setting, please click
the update button to make the change effective.
Group ID
Setting the baud rate of RS232 extension on the selected Tx --
UART Baud
After changing the setting, please click the update button to make the change
Rate
effective.
Note that the baud rate of Tx and Rx should be the same.
Setting the selected Tx video output path --
1. Loopthrough and Network Output: The HDMI out port of Tx and Rx will output the
2. Disable Network Output: Only the Tx's HDMI out port will output the video.
Stream Output
3. Disable Loopthrough Output: Only the Rx's HDMI out port will output the video.
Path
4. Disable All Video Output: The HDMI out port of Tx and Rx will not output the video.
After changing the setting, please click the update button to make the change
effective.
MAC Address
Display the Ethernet MAC address of the device. Note that user cannot change it.
Setting the selected Tx name for identification --
Up to 32 digits is accepted for the device name setting.
Device Name
After changing the setting, please click the update button to make the change
effective.
If the Tx Device Selection can't load device properly, please make sure the PC's IP address
is in the same subnet as IHD-210PT.
After rebooting, the Group ID will follow the hardware Group setting.
video.
High Definition HDMI Extender over IP with PoE
Function
30
IHD-210PT / IHD-210PR

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ihd-210pt

Table of Contents