Planet Networking & Communication IHD-210PR User Manual page 20

High Definition HDMI Extender over IP with PoE
IHD-210PT / IHD-210PR
4. Select "Use the following IP address".
IP address: You have to set the same network segment between your PC's IP address and the
transmitter/receiver.
For example, if the transmitter's IP is 169.254.0.157, then you should set your PC's IP address to
169.254.0.xxx where xxx can be any number between 2 and 253. (same as receiver)
Subnet mask: Enter 255.255.0.0.
Please do not set more than one IP address in the connected PC.
20