Table of Contents
Advertisement
Quick Links
Video Wall Ultra 4K HDMI/USB Extender over IP with PoE
This document contains confidential proprietary information and is property of PLANET. The contents of this
document should not be disclosed to unauthorized persons without the written consent of
Change History:
Revision
Version 1.0
Author
Keithy Lin
Reviewed by:
Jonas Yang
Product Specifications
IHD-410PT
IHD-410PR
Date
01/23/2017
Product Specification of IHD-410 Series
Author
Keithy Lin
Editor:
Keithy Lin
Approved by:
Kent Kang
PLANET.
Change List
Initial release
Advertisement
Table of Contents
Related Manuals for Planet Networking & Communication IHD-410PT
Summary of Contents for Planet Networking & Communication IHD-410PT
- Page 1 Product Specification of IHD-410 Series Product Specifications Video Wall Ultra 4K HDMI/USB Extender over IP with PoE IHD-410PT IHD-410PR This document contains confidential proprietary information and is property of PLANET. The contents of this document should not be disclosed to unauthorized persons without the written consent of PLANET.
-
Page 2: Product Descriptions
The IHD-410 series is the combination of the transmitter, IHD-410PT, and the receiver, IHD-410PR. They can be used as an audio, video and IR extender over IP and applied to point to point, point to multi-point, multi-point to multi-point and eye-catching video walls of up to 16 by 8 displays. - Page 3 Efficient Control via Selectable 16-Channel DIP Switch Where there is more than one transmitter in the video extend system, the DIP switch in the IHD-410PT and IHD-410PR facilitates distinguishing the pair of the transmitter and receiver units in the same channel. It further enables the broadcasting system to perform multiple video extend systems simultaneously through matching of the IHD-410PT and IHD-410PR.
-
Page 4: Product Features
Product Specification of IHD-410 Series Confidential 2. PRODUCT FEATURES HDMI Network 4K ultra high-quality video transmitter Supports IR extension for controlling video source Supports RS232 bi-directional remote extension Assigns video sources to any monitor of the video wall system ... -
Page 5: Product Specifications
Chipset : Aspeed RAM : 256MB Flash : 128MB 3.2 Function Specifications Model IHD-410PT IHD-410PR Hardware Specifications Network Interface RJ45 port (10/100/1000BASE-T Ethernet) x 1 Serial Interface DB-9 female connector for RS232 x 1 ACT LED x 1 Link LED x 1... -
Page 6: Physical Specifications
Product Specification of IHD-410 Series Confidential Model IHD-410PT IHD-410PR 1080p @30/25 Hz 1080i @ 60/50 Hz VGA Video Out Resolution 720p @ 60/50 Hz 480p @ 60/50 Hz 480i @ 60/50 Hz HDMI Video Out Rotation 0 degrees/180 degrees/270 degrees... - Page 7 Product Specification of IHD-410 Series Confidential Diagrams: Transmitter: Filename: PS-IHD-410 Series_v1.0.doc Page 7 of 12 Printed on 01/23/2017...
- Page 8 Product Specification of IHD-410 Series Confidential Receiver: Interfaces: Filename: PS-IHD-410 Series_v1.0.doc Page 8 of 12 Printed on 01/23/2017...
- Page 9 Product Specification of IHD-410 Series Confidential Interfaces Definition: Position Description Function Connect to a LAN Switch. IGMP snooping and Jumbo Frame supported Gigabit IEEE 802.3af/at PoE+ Ethernet switch is recommended. LED: Ethernet (PoE) 1. LAN LED (green color): This LED will be flashing while network is accessing via Ethernet.
- Page 10 Product Specification of IHD-410 Series Confidential Position Description Function Turn on the device first. Press and hold the button for over 15 seconds. Once the device is operational again, it has restored to default settings. Stop connecting to video source: Turn on the device first.
-
Page 11: Packaging Information
Product Specification of IHD-410 Series Confidential Mounting Bracket x 2 Screws x 4 3.9 Packaging Information Dimensions (W x D x H) 280 x 170 x 55 mm Weight 900g (gross weight) Carton Dimensions (W x D x H) 575 x 355 x 245 mm Carton Weight 15.1kg (gross weight) - Page 12 Product Specification of IHD-410 Series Confidential APPENDIX A: Default Setting Default Setting Auto IP address 169.254.xxx.xxx (user is able to find it by connecting the Default IP Address Receiver to HDMI monitor) Default Port Filename: PS-IHD-410 Series_v1.0.doc Page 12 of 12 Printed on 01/23/2017...