Advertisement
So the complete jet is put on from behind and firmly screwed. (The bowden cables with
the gray cover are inserted into the 2 openings).
complete jet
.
In the picture you can see the jet with mounted engine, but for gluing you should not
screw the engine yet, only when the jet is really tight, you can screw the engine. But as a
burden for drying the glue you can put them already in the jets.
Caution: always carry out the bonds with enough glue, do not save on the glue, epoxy
resin can be made thicker with a little bit of baking soda for example. However, we
recommend Sika Flex or a good adhesive silicone, e.g. Bostik MS.
Advertisement
