Siemens SIPLUS RIC IEC on S7 Manual page 18

Group /
Parameter
Para_MD
Para_MD[x].
P_Src_ASDU_Address
Para_MD[x].
P_Src_Info_Address
Para_MD[x].
P_Dst_Info_Address
Para_MD[x].
Res_10
Para_MD[x].
Res_11
Para_MD[x].
Int_ToDo
Para_MD[x].
Im_State_of_TimeStam
pg
Para_MD[x].
Im_S7_TimeStamp
Para_MD[x].
Im_TI_Basic
Para_MD[x].
Im_TI
Para_MD[x].
Im_Value
Para_MD[x].
IM_State
Para_MD[x].
Diag_Count
Para_MD[x].
IM_COT
Para_MD[x].
IM_Originator
Para_MD[x].
P_Threshold_Value
Para_MD[x].
Value_Last
Para_MD[x].
Threshold_Memory
These values are pre-adjusted in the sample DB (DB161) and have not to be changed.
Note:
Changes have to be performed always in the ‚Data view', and not in the ‚Declaration view'
(except dimensioning of the array).
SIPLUS RIC IEC on S7 V1.5
Functional description
Addr. Addr.
Type
rel Abs
ARRAY [1..n]
STRUCT
+0.0 32.0 INT
+2.0 34.0 DINT
+6.0 38.0 DINT
+10.0 42.0 BYTE
+11.0 43.0 BYTE
+12.0 44.0 BYTE
+13.0 45.0 BYTE
+14.0 46.0 DATE_AND_TIME
+22.0 54.0 BYTE
+23.0 55.0 BYTE
+24.0 56.0 DWORD
+28.0 60.0 BYTE
+29.0 61.0 BYTE
+30.0 62.0 BYTE
+31.0 63.0 BYTE
+32.0 64.0 REAL
+36.0 68.0 REAL
+40.0 72.0 REAL
44.0 76.0 END_STRUCT
!!! These values are parameter and can be adjusted !!!
Page 18 of 28
Start value
n = Anzahl Parametereinträge
Parameter: Source common address of
0
ASDU (0 -> all ASDU will be accepted)
Parameter: Source information object
L#0
address (Src_IOA)
Parameter: Destination information object
L#0
address (0 -> Src_IOA will be used)
B#16#0
B#16#0
B#16#0 Internal
B#16#0 Image: State of TimeStamp
Image: Timestamp (S7 Date and Time)
Image: Basic
B#16#0
(1,3,5,7,9,15)of reveived info
Image: Real type identifier of received
B#16#0
info
Image: Value of the received info (ME
DW#16#0
always as Real)
B#16#0 Image: State of the received info
Info: Counter which will be increased with
B#16#0
each received info
Image: Cause of transmission of received
B#16#0
info (may be changed internal)
B#16#0 Image: Originat of received info
Threshold value (0: without), integrating
0.0
threshold calculation
0.0 Internal
0.0 Internal
END_STRUCT (48 BYTE)
I IA CE
Comment
type identifier
©SIEMENS AG 2013