3 Assembly and installation [installer]
NOTICE
Material damage due to high temperatures!
Install the
pump station
be very hot near the collector. It may be necessary to install an intermediate tank in order to
protect the expansion vessel.
8
at a sufficient distance from the collector field, since the solar fluid may
1. Remove the station from the packaging.
2. Remove the insulating front shell.
3. Copy the mounting holes of the solar station besides
the thermometers to the mounting surface.
4. Drill the holes and mount the solar station to the wall
with the enclosed wall plugs and screws.
Installation-Operation ST1 Solar Pump Station
3 Assembly and installation [installer]
0DNO0201