IBM FlashSystem A9000R Deployment Manual page 28

Physical features
Temperature
Host connectivity
6
IBM FlashSystem A9000R Models 9835-415 and 9837-415 Deployment Guide
Specification
*Typical effective capacity is the available capacity after system overhead (including
over-provisioning and RAID protection) and after the data reduction benefits of pattern
removal, deduplication and compression. this assumes data reduction of up to a multiple
of 5.26 to 1.
**Maximum capacity refers to the effective capacity provisioning limit.
Specification
Rack dimensions (H × W ×
D)
Front clearance
Rear clearance
Weight
Input voltage
Power usage
Specification
Temperature
Maximum altitude
Humidity
Specification
Host system interfaces Storage systems with
(per grid controller) Fibre Channel (FC)
capabilities)
Storage systems with
iSCSI (Ethernet)
capabilities only
Details
Details
201.5 cm (42U) × 66.44 cm × 129.7 cm
(79.3 in. × 25.4 in. × 51.1 in.)
120 cm (47.2 in.)
100 cm (39.4 in.)
Entry configuration: 666 kg (1468 lb)
986 kg (2174 lbs)
200–240 V AC, 50/60Hz (+/-10% tolerance) via 30A–63A
Note: Dependent on input phase configuration type (single,
delta, or wye)
Entry configuration: 3.07 KW (typical); 4.82 KW (max)
Maximum configuration: 8.81 KW (typical); 13.91 KW (max)
See "Power consumption" on page 27.
Details
10 - 35° C (50 - 95° F)
2134 m (7000 ft.)
25 - 80% non-condensing
Details
4 × 16 Gb Fibre Channel + 2 × 10 Gb
iSCSI
4×10 Gb iSCSI