Charging The Battery Pack - Toro 51830 Operator's Manual

1. Variable-speed switch
2. Lockout trigger
Shutting Off the Trimmer
To shut off the trimmer, release both triggers.
Whenever you are not using the trimmer or are
transporting the trimmer to or from the work area,
remove the battery pack.
Removing the Battery Pack
from the Trimmer
Press the battery latch on the machine to release the
battery pack and slide the battery pack out of the
machine (Figure 8).
1. Battery latch
Figure 7
3. Run trigger
Figure 8

Charging the Battery Pack

Important:
The battery pack is not fully charged
when you purchase it. Before using the tool for
the first time, place the battery pack in the charger
and charge it until the LED display indicates the
battery pack is fully charged. Read all safety
precautions.
g268420
Important:
Charge the battery pack only in
temperatures that are within the appropriate
range; refer to
Note:
At any time, press the battery-charge-indicator
button on the battery pack to display the current
charge (LED indicators).
1. Make sure that the vents on the battery are clear
of any dust and debris.
2. Line up the cavity in the battery pack
with the tongue on the charger.
1. Battery pack cavity
g268419
2. Battery pack venting areas 5. LED indicators (current
3. Battery pack terminals
3. Make sure that the vents on the battery charger
are clear of any dust and debris.
4. Slide the battery pack into the charger until it is
fully seated
12
Specifications (page
Figure 9
4. Handle
charge)
6. Battery-charge-indicator
button
(Figure 10).
11).
(Figure 9)
g282651