Balance Exposure Bracketing Settings - GigaPan EPIC PRO V User Manual

4.1 Basic Exposure Bracketing Settings
In-camera Bracketing for HDR (preferred method)
This configuration will have the GigaPan capture multiple frames in each position, while
the camera adjusts the shutter speed to correctly expose the images.
1. Configure you equipment to do bracketing exposure
Configure the GigaPan using the following settings:
In the "Options" menu, configure your settings as follows...
1. Set Brackets to 1 (normal)
2. Set Multi Picture to the number of exposures per position (ie. 3,5,7,9)
3. Set Time/Exposure to the longest shutter speed you camera will fire
4. In the "Expert Menu", set shutter length to 0.5 seconds
Configure the camera using the following settings:
1. Set the camera to shoot singe shots
2. Set the desired bracketing configuration
3. Set camera to whatever mode you deem necessary to get your desired shot
4. Set your shutter and aperture to your 0 exposures value. Might need an ND
so as to not overexpose on the longer bracketing shots.
2. Configure the GigaPan to take a panorama as usual. While taking the panorama, the
GigaPan will take multiple exposures at each location. Your camera will do the necessary
adjustments for shutter speed to get the desired exposure levels. If the camera has trouble
writing the images to the card before the next image position, increase the "Time/Picture"
in the "Options" menu.
Reference example has 3 images with 0 EV at 2 sec
+ 1.0 EV 4 sec
- 1.0 EV 1 sec
EV Bracketing adjustment is 1.0 stops
31