Operation From Tuner; Indicator Leds - Mat-Tuner mAT-180H Instruction Manual

®
MAT-TUNER

OPERATION FROM TUNER

Users can also start tuning through the TUNE button on the front panel of the mAT-180H.
-
Set the radio to the FM, FSK or RTTY mode, in order to make the transceiver output a stable
carrier signal
-
Make the power reduced to 10 watts or less.
-
Press and hold the transceiver's [PTT] button, then press the [TUNE] button once on the front
panel of mAT-180H to start the automatic tuning.
-
Return to the previous mode and power level after tuning, the tuning process completion.

INDICATOR LEDS

There are four indicator LEDs on the front panel of mAT-180H. The PWR LED is the power
light. When lit, it indicates that the tuner has been turned on. The 1.5, 2.0, 3.0 lights are used for
current SWR. The 1.5 light means that the current SWR is less than or equal to 1.5; The 2.0 light
means that the current SWR is from 1.5 to 3.0. The 3.0 light means the SWR is higher than 3.0.
TECHNICAL SUPPORT
Visit the Support Center at: http://www.mat-tuner.com/en/.
PRODUCT FEEDBACK
We encourage product feedback! Tell us what you really think of your MAT-TUNER product.
In an email tell us how you used the product and how well it worked in your application. We like
to share your comments with our staff, our dealers, and even other customers at the MAT-TUNER
website.
Welcome to http://www.mat-tuner.com/ for more information
5 / 5
Instruction Manual
MAT-TUNER
BG3MZU 2019.03.02