Info Menu; Reset Menu - Epson EH-TW7100 User Manual

Configuration Menu

Reset menu

Function
Reset network settings.

Info menu

Function
Projector Info
Version
* This is not displayed when a LAN image signal is being input.
Reset menu
Function
Reset Lamp Hours
Reset Memory
Reset All Config
You can reset all adjustment values for Network to their default settings.
Menu/Settings
Lamp Hours
Source
*
Input Signal
*
Resolution
*
Scan Mode
*
Refresh Rate
*
3D Format
*
Sync Info
*
Color Depth
*
Color Format
Status
Serial Number
Event ID
Main
Video2
Resets the cumulative lamp hours use time to 0 H. Reset when you replace the
lamp.
Resets all items for Memory to their default settings.
Resets all items in the Configuration menu to their default settings.
The following adjustment values are not reset to their defaults: Memory, Panel
Alignment, Color Uniformity, Lamp Hours, Language, and Network Settings.
Explanation
Explanation
Displays the cumulative lamp operating time.
Displays the current input source.
Displays the input signal setting of the current input source.
Displays the resolution.
Displays the scan mode.
Displays the refresh rate.
Displays the 3D format of the signal input during 3D projec-
tion (Frame Packing, Side by Side, or Top and Bottom).
Displays the image signal information.
This information may be needed if service is required.
Displays the color depth and color difference.
Displays information on the Color Space and Dynamic Range.
This is information about errors that have occurred on the
projector.
This information may be needed if service is required.
Displays the projector's serial number.
The application error log appears.
Displays the firmware version of the projector.
Explanation
70
p.82
s