Part Names And Functions; Front/Top - Epson EH-TW7100 User Manual

Introduction

Part Names and Functions

Front/Top

Name
a Lamp cover
b Air exhaust vent
c Focus ring
d Lens cap
e Lens
f Zoom ring
g Remote receiver
h Front adjustable
foot
i Air filter cover
Air intake vent
j Vertical lens shift dial
k Horizontal lens shift
dial
Open when replacing the projector's lamp.
Exhaust vent for air used to cool the projector internally.
Caution
While projecting, do not put your face or hands near the air exhaust vent,
and do not place objects that may become warped or damaged by heat near
the vent. Hot air from the air exhaust vent could cause burns, warping, or
accidents to occur.
Adjusts the image focus.
Install when not using the projector to protect the lens from being scratched or
soiled. p.25
s
Images are projected from here.
Adjusts the image size.
s
Receives signals from the remote control.
When set up on a surface such as a table, extend the foot to adjust horizontal tilt.
p.29
s
When cleaning or replacing the air filter, open this cover and remove the air filter.
p.84, p.86
s
Intake vent for air used to cool the projector internally.
Turn the dial to move the position of the projected image up or down.
Turn the dial to move the position of the projected image left or right.
Function
p.87
s
p.28
s
p.29
p.24
s
7
p.29
s
p.29
s