Correct Using The Keystone Button - Epson EH-TW7100 User Manual

Basic Operations
• Correct the corners of the projected image individually s

Correct using the Keystone button

You can use the up/down/left/right buttons on the control panel to correct vertical and horizontal keystone
distortion.
Press the up or down button to display the V-Keystone/H-Keystone gauges.
When the gauges are displayed, press the up and down buttons to perform vertical correction, and press the
left and right buttons to perform horizontal correction.
When the top or bottom is too wide
When the left or right is too wide
c
•
When you correct keystone distortion, the projected image may be reduced. Increase the projection
distance to fit the projected image to the screen size.
•
You can also set H/V-Keystone from the Configuration menu.
Keystone p.62
•
You can make effective corrections within a projection angle range of 30° in any direction.
•
You can adjust the volume by pressing the Volume (Left/Right) buttons when the V-Keystone/H-
Keystone gauges are not displayed. (EH-TW7100 only)
p.32
Settings - Keystone - H/V-
s
p.33
s
31