Controls - Danterm ACT 7 Quick Start Manual

QUICK START GUIDE

Controls

Temperature
display
Mode switch
Defrost
indicator
Fan speed control
The speed of the fan is controlled by the fan speed control
dial as shown above. Turning the dial clockwise increases
the speed of the fan and more solid black bars will be shown
on the fan speed indicator. Please note that there is a short
delay between turning the dial and the fan speed increasing
or decreasing. If using the optional duct kit, the switch on the
back of the electric box must be set to ducted mode. (Only
use fan speeds in the RED
for ducted operation).
6
A/C indicator
range on the fan speed indicator
Alarms Tank full
indicator
Mode switch
Top position: 'fan only' mode is selected. In 'fan only' mode
air circulates, but there is no air conditioning.
Centre position: 'stand by' mode is selected. The device
remains powered but will not operate.
Bottom position: 'air conditioning' (A/C) mode is selected.
There is a six minute delay timer when switching to 'A/C'
mode from 'stand by' or 'fan only' modes. Cooling will start
after this delay period.
Fan speed Fan speed
indicator control dial
ACT 7 QUICK START GUIDE