Honda ACG110CBT 2016 Owner's Manual page 65

3. Place your scooter on its centre stand on a
firm, level surface.
4. Place a drain pan under the drain bolt.
5. Remove the oil fill cap/dipstick, drain bolt
and sealing washer to drain the oil.
u Discard the oil at an approved recycling
centre.
6. Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
Torque: 24 N·m (2.4 kgf·m, 18 lbf·ft)
7. Fill the crankcase with the recommended
oil ( P. 47) and install the oil fill
2
cap/dipstick.
Required oil
When changing oil only:
0.7 litres (0.7 US qt, 0.6 Imp qt)
Engine Oil
Sealing washer
8. Check the oil level.
9. Check that there are no oil leaks.
u Changing Engine Oil
Drain bolt
P. 59
2
61