Omron C200HS Series Replacement Manual page 18

< I/O Units and CPU Bus Units>
Unit name
Basic I/O Unit
Special I/O Unit
Communication Unit
C200H-series Unit
C200H-I□□□
C200H-O□□□
C200H-M□□□
C200H-□□□□
[SYSMAC LINK]
Coaxial:
C200H-SLK21-V1
C200HS-SLK22
C200HW-SLK23/24
Optical:
C200H-SLK11
C200HS-SLK12
C200HW-SLK13/14
[SYSMAC NET]
C200H-SNT31
C200HS-SNT32
[Host Link]
C200H-LK101-PV1
C200H-LK201-V1
C200H-LK202-V1
[PC Link]
C200H-LK401
CS1-series Unit
C200H-I□□□
C200H-O□□□
C200H-M□□□
or,
CS1W-I□□□
CS1W-O□□□
CS1W-M□□□
C200H-□□□□
or
CS1W-□□□□
[SYSMAC LINK]
Coaxial: CS1W-SLK21
Optical: CS1W-SLK11
or
[Controller Link]
Wired: CS1W-CLK23
Optical: CS1W-CLK13/53
[SYSMAC NET]
None
[Controller Link]
Wired: CS1W-CLK23
Optical: CS1W-CLK13/53
[Serial Communications]
None
CS1W-SCU21-V1
(+ optical link module)
CS1W-SCU21-V1
CS1W-SCB21-V1
CS1W-SCB41-V1
Host Link port built in the
CPU Unit
CS1W-SCU31-V1
CS1W-SCB41-V1
[PC Link]
C200H-LK401
[Controller Link]
Wired: CS1W-CLK23
Optical: CS1W-CLK13/53
Description
C200H-series Basic I/O Units can be used
with CS1-series CPU Units.
Refer to Appendix E. Table of Input/Output
Units for CS1-series Basic I/O Units
corresponding to C200H-series Basic I/O
Units.
To facilitate maintenance, we recommend
you to use CS-series Basic I/O Units
instead.
C200H-series Special I/O Units can be used
with CS1-series CPU Units. However, there
are some remarks to be followed.
To improve the system performance and to
facilitate maintenance, we recommend you
to use the CS-series Special I/O Units
instead.
C200HW-SLK□□ cannot be used with the
CS1-series CPU Unit.
Refer to the SYSMAC CS1W-SLK11/21
SYSMAC LINK Units OPERATION MANUAL
(Cat. No. W367) for details about SYSMAC
LINK.
We recommend you to use Controller Link
instead.
Refer to the Controller Link Units Operation
Manual (Cat. No. W309) and Optical Ring
Controller Link Units Operation Manual (Cat.
No. W370) for details.
SYSMAC NET cannot be used with the
CS1-series CPU Unit.
We recommend you to use Controller Link
instead.
Refer to the Controller Link Units Operation
Manual (Cat. No. W309) and Optical Ring
Controller Link Units Operation Manual (Cat.
No. W370) for details.
C200H-series Host Link Units cannot be
used with the CS1-series CPU Unit.
Refer to the SYSMAC CS/CJ Series Serial
Communications Boards/Units OPERATION
MANUAL (Cat. No. W336) for details.
The CS1 Series does not have an
Optical-type Serial Communications
Board/Unit. Use the wired type instead or
use an external optical link module.
Use one of the left CS1-series Units/Boards.
Use one of the left CS1-series Units/Boards.
The PC Link Unit can be used with the
CS1-series CPU Unit. However, the Link
Area allocation must be changed.
We recommend you to use Controller Link
instead.
Refer to the Controller Link Units Operation
Manual (Cat. No. W309) and Optical Ring
Controller Link Units Operation Manual (Cat.
No. W370) for details.
9