Wheel Removal - Honda CB400 SUPER FOUR Owner's Manual

05/03/25 12:09:09 32MCE610_116

WHEEL REMOVAL

Refer to the Safety Precautions on page
This motorcycle is equipped with a side
stand only. Therefore, if front or rear wheel
removal is required, it will be necessary to
raise the center of the motorcycle with a
jack or other firm support. If none is
available, see your Honda dealer for this
service.
Front Wheel Removal
1. Raise the front wheel off the ground by
placing a support block under the engine.
2. Remove the right and left caliper
assemblies ( ) from the fork leg by 1
removing the fixing bolts ( ).
To avoid damage to the brake hose, support
the caliper assembly so that it doesn't hang
from the hose. Do not twist the brake hose.
106
82 .
(2)
2
(1) Brake caliper assembly
(2) Fixing bolts
(1)