Honda CB400 SUPER FOUR Owner's Manual page 118

05/03/25 12:09:24 32MCE610_118
Installation:
1. Position the wheel between the fork legs
and insert the front axle shaft from the
left side, through the left fork leg and
wheel hub.
2. Align the index line (
shaft with the surface (
3. Tighten the axle pinch bolts on the left
fork leg to the specified torque:
23 N·m (2.3 kgf·m , 17 lbf·ft)
4. Tighten the axle bolt to the specified
torque:
59 N·m (6.0 kgf·m , 43 lbf·ft)
5. Install the brake caliper onto the fork leg.
To avoid damaging the brake pads,
carefully fits the brake disc ( ) between
the pads.
6. Install the caliper fixing bolts and tighten
to the specified torque:
30 N·m (3.1 kgf·m , 22 lbf·ft)
108
7. Operate the front brake and pump the
fork several times.
Check for free wheel rotation after the
brake is released. Recheck the wheel if
the brake drags or the wheel does not
6 ) of the front axle rotate freely.
7 ) of fork leg.
8
(6) Index line
(6)
(7)
(7) Surface