Honda CB400 SUPER FOUR Owner's Manual page 110

05/03/25 12:08:34 32MCE610_110
4. Check the rear axle alignment by
confirming the scales ( ) on the drive
chain adjusters against the index marks
( ) on the swingarm. 4
Both lef t and right scales should
correspond. If the axle is misaligned, turn
the left or right adjusting bolt until the
scales correspond on both sides of the
swingarm and recheck chain slack.
5. Tighten the rear axle nut to the specified
torque:
88 N·m (9.0 kgf·m , 65 lbf·ft)
If a torque wrench is not used for this
installation, see your Honda dealer as soon
as possible to verify proper assembly.
6. Tighten the adjusting bolts lightly.
100
3