Honda CB400 SUPER FOUR Owner's Manual page 119

05/03/25 12:09:30 32MCE610_119
8. If the clearances between each surface of
the brake disc and the brake caliper body
( ) (not brake pads) are symmetrical, 9
follow next step.
If the clearances are not symmetrical,
loosen the left axle pinch bolts and pull
the left fork outward or push inward to
adjust the clearance. Then follow the next
step.
9. Tighten the axle pinch bolts on the right
fork leg to specified torque:
23 N·m (2.3 kgf·m , 17 lbf·ft)
Visually check that the clearances
between each surface of the brake disc
and the brake caliper body (not brake
pads) are symmetrical.
If the torque wrench was not used for
installation, see your Honda dealer as soon
as possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
(9)
(8) Brake disc (9) Brake caliper body
(9)
(8)
109