5 SETPOINTS
TURNAROUND: 5
ENTER to modify
FUNCTION:
Turnaround is the delay before the relay changes from transmit to receive or vice versa. This setpoint need not
be adjusted unless operating on a very slow system.
STAT: read only
ENTER to modify
FUNCTION:
This setpoint allows the user to configure the parameters in the STATUS MODE such that they are read only or
read/writeable.
PASSWORD: 0000
ENTER to modify
FUNCTION:
This allows the user to program a new password other then the factory default to restrict access to programma-
ble feature on the SPM.
GE Power Management
Range: 0 to 1000 ms
Step: 1
Range: read only, read/write
Range: 0000 to 9999
Step: 1
SPM Synchronous Motor Protection & Control
5.4 CONFIGURATIONS MENU
5.4.7 TURNAROUND
5.4.8 STATUS MODE
5.4.9 PASSWORD
5
5-
13