Measurements Menu; Measurements Menu Table; Settings Menu; Settings Menu Table - ABB Emax DC L3447 Installation And Service Instructions Manual

Protection Parameter / Function
OT Enable Trip
Load Control
Threshold 1
Enable
Threshold
Threshold 2
Enable
Threshold
Threshold lw
Enable
Threshold
Note: for an explanation of the characteristics of the single protections and their settings and corresponding curves, see par. 12.2.9.

12.5.3 Measurements Menu

The following is a summary of the parameters accessible from the menu in the PR122/DC unit.
12.5.3.1

Measurements Menu table

Setting Parameter / Function
Historicals
Trips
Events
Measurements
I Max
Reset measurements
Contact wear

12.5.4 Settings Menu

Menu
Protections
Measurements
Settings
Protections settings
Settings
Circuit Breaker
Hw Trip
Modules
Circuit breaker settings
12.5.4.1

Settings Menu table

Parameter / Function
Circuit breaker Installation
Hw trip
Modules Module
PR120/D-M - COM
PR120/K - Signalling
Local Bus unit
Data logger Enable
Measurement
interval
System Date
Time
Language
New password
Display Contrast
The summary table relates to the surfing of the pages dedicated to the PR120/K module (see par. 14.3) and to the PR021/K unit (see par. 15.1).
L3447
Model
L3728
ON / OFF
ON / OFF
ON / OFF
ON / OFF
Values
3/5
The configuration parameters in the Settings menu are password protected.
1/9
Circuit Breaker
Enter ↵
Installation
Values
Install/Uninstall
Enable-Disable
if any
if any
Absent - Present
ON/OFF
Sampling frequency
Stop event
Stopping delay
Restart
Stop
from 5 to 120 min, step 5 min
English/Italiano/Français/Deutsch/Español
Notes
Last trips (20)
Events log (80 events max.)
Current
Percentage of wear on CB contacts
Enter ↵ + PWD
Notes
see par. 12.5.4.2.1
see par. 12.5.4.2.2
Apparatus
Emax DC
Doc. No.
1SDH000635R0002
Circuit Breaker
21/2
Install
Uninstall
Scale
Page No.
43/108