Table of Contents
Advertisement
WARNING! Hazard via electrical current!
The device can cause injuries due to improper installation!
Before installation the local power grid specification should be compared with
that of the device (see type label). Connect the device only in case of compliance!
Take note of the security advice!
•
The electrical circuit of the socket must be secured to at least 16A. Only connect
the device to a wall outlet; do not use any extension cords or power strips.
•
Place the device so that the plug is easily accessible so as to quickly disconnect the
device if the need arises.
5.3 Operation
•
Before using the device, clean it according to the instructions contained
in 6.2 „Cleaning".
•
Before pouring liquid and connecting the device, turn the temperature dial counter-
clockwise to the counter-clockwise to the setting marked ►, and turn the function
switch to OFF (at the top).
•
Pour the desired amount of beverage into the device up to the „MAX" symbol.
Do not exceed the maximum fill level!
•
Ensure that drinkable liquid is always inside the device before turning it on.
The device may not contain any liquid unsuitable for drinking, such as acids,
bases, oils, etc.!
•
Place the lid on the device and ensure that it locks in place with the handles.
WARNING!
When the device is in use, ensure that no liquid splashes, as this could lead to
disturbances in electronic components and to personal injury.
- 24 -
Advertisement
Table of Contents
