Tele System Hello Quick Start Manual page 16

16
Device List: click on this to access a list of connected with the mobile device. From here you can access the edit parameters
page.
Folder: folder access photos and recorded videos from the application.
Log on to the interface list to choose a device with SD card inserted from which you can reproduce a recording remotely
(as shown). Click " " to enter the "Search device", the user can choose channel, set "registration Type "Start" and "end"
as search criteria, and then "Search" to access the list of recordings, choose one to start playback (feature available only for
IP cameras)
Settings: log in to the local settings: number of available videos and screen size of the screen
[Video View]: Select "1" (the default) and only one channel will be used for the video display on the screen. Select "4"
and four channels will be available. The default choice ensures simultaneous vision of 4 pages from 4 different
sources.
[Video aspect]: available options are "original" and "full screen".
Help: access the user guide.
Edit parameters
In the "Device", you can change some parameters of Hello. Make sure that the "Push notifications" option is turned off befo-
re proceeding, then click on the device name and then select "Edit".
To make some of these changes, the application will ask you to enter your password (default PIN: 888888)
The parameters that you can modify are as follows:
Unlock Password: if activated, to unlock the power connected the electrical lock to Hello, you need to enter a password (for
setting the password, refer to the option Change Password to unlock).
Resolution: the options are "HQ" and "Smooth"; "HQ" involves a more clear and defined image, but with a possible delay in
transmission, "Smooth" that the video will be more fluid and faster but with less definition.
Device Settings: enter the menu to change some parameters related to videophone:
Release Duration: sets the pulse duration to the release of the electric lock.
Notifications: notifications from active motion sensor (only available for IP cameras).
Motion: activate the motion sensor (only available for IP cameras).
Email: enable email notifications from motion sensor (only available for IP cameras).
TELE System